Sonoro sonoroCD SO-210, Руководство по эксплуатации

Страница: 91 / 231

Manual tuning
Prerequisite:
The DAM/FM antenna is connected.
Fig. 36: Manually searching a DAB station
1.
Press the [Menu] button in DAB playback mode.
2. Press the [Next] button.
ð
[DAB Manual Tune] appears in the display
(Fig. 36).
3. Press the click wheel on the device or the [OK]
button on the remote control.
4. Turn the click wheel or press the [Next] or
[Previous] buttons to change the frequency
range.
5. Press the click wheel to confirm your selection.
Removing inactive stations – Prune list
Prerequisite:
The DAB station list created using the DAB full scan
function is out of date (e. g., after a change of
address).
Fig. 37: Deleting inactive DAB stations
1.
Press the [Menu] button in DAB playback mode.
ð
[Prune list] (Fig. 37) appears in the display.
2. Press the click wheel to confirm your selection.
Fig. 38: Pruning
3.
Press the click wheel again to select and delete
inactive DAB stations.
ð
Inactive DAB stations are deleted. In the
meantime, [Pruning] is displayed (Fig. 38).
Storing a DAB station
1. To store DAB stations, proceed as described in
Ä Chapter 11.1.2 ‘Storing FM stations’
on page 90.
i
You can store up to 6 DAB stations.
Retrieving stored DAB stations
1. To retrieve a stored DAB station, proceed as
described in Ä Chapter 11.1.3 ‘Retrieving saved
FM stations’ on page 90.
ð
The selected station is played.
Retrieving DAB info
In DAB mode, you can call up information on the sta-
tion, programme, etc. The information is displayed in
the following order:
n Station name (starting point)
n
Broadcaster
n
DLS ("Dynamic Label Service" programme-related
information, such as artist, track, etc.)
n Programme type (e. g. Sport)
n
Station frequency
n
Signal quality
The device is in DAB mode. The display shows the sta-
tion name.
1.
To retrieve the different DAB information, press
the [STOP] button on the device or on the
remote control in DAB mode.
ð
The display shows the [Broadcaster] text.
2. Press the [Stop] button again.
ð
The display shows the [DLS] text.
3. Proceed accordingly to retrieve the remaining
DAB information.
Setting the DRC
3 different settings are available for the Dynamic
Range Compression (DRC) function:
n
DRC HIGH
n
DRC LOW
n DRC OFF
The device is in DAB mode.
1.
Press the [Menu]button.
ð
The display shows the [DAB Full Scan] text.
91