Sonoro SO-310, Руководство по эксплуатации

Страница: 63 / 203

i
Consult the manual of your mobile phone or your
Bluetooth‐enabled device for help.
Fig. 42: Setting Bluetooth mode
1.
Switch on the sonoroSTEREO.
2. Press the [MODE] button on the front of the
device until the device shows the [Bluetooth]
symbol on the display. You can also press the
[Bluetooth] button on the remote control.
ð
The Bluetooth mode is now active (Fig. 42).
3. Connect your mobile phone or your Bluetooth-
enabled device to the sonoroSTEREO via Blue-
tooth.
i
The sonoroSTEREO can store up to 8 Bluetooth‐
enabled devices and connects automatically to
previously configured devices if Bluetooth is acti‐
vated.
13.1
Connecting and deleting Blue-
tooth devices
Connecting Bluetooth-enabled devices
Fig. 43: Searching for Bluetooth
1.
Activate Bluetooth mode.
ð
The display will show [Searching] and the
[Bluetooth] symbol will flashing (Fig. 43).
2. Connect your mobile phone or your Bluetooth-
enabled device to the sonoroSTEREO via Blue-
tooth.
ð
After connecting, the display will perma-
nently show the [Bluetooth] text.
Deleting connected devices
3.
3. Press and hold the [Stop] button on the front
of the sonoroSTEREO to delete the Bluetooth-
enabled device and interrupt the connection.
13.2 Playing music via Bluetooth
Starting playback
1.
Press the click wheel or the [Play/Pause] button
on the front of the sonoroSTEREO or on the
remote control to start playback.
Pausing playback
2.
To pause playback, press the click wheel or the
[Play/Pause] button again.
i
The operation of an external device using the but‐
tons on the sonoroSTEREO is possible to a limited
extent.
14 AUX playback
Using an RCA cable, you can connect and play addi-
tional audio devices via the AUX 1 port. Using a
3.5mm jack plug, you can connect additional audio
devices to the sonoroSTEREO via the AUX 2 port.
Fig. 44: Activating AUX playback
1.
Switch on the sonoroSTEREO.
2. Plug the RCA cable into the AUX 1 port or the
3.5mm jack plug into the AUX 2 port on the rear
of the device.
3. Press the [MODE] button until the display shows
[AUX.1 Input] or [AUX.2 Input]. You can also
press the [AUX] button on the remote control.
ð
The display will show the [AUX.1 Input] or
[AUX.2 Input] (Fig. 44).
4. Switch on the external device and start playback
on the external device.
15 USB playback
You can connect additional devices and play music
using the USB Charger & Playback port on the rear of
the sonoroSTEREO.
i
The MP3 and WMA formats can be played back.
©
2013 63