Sonoff ESP8285-PSF-B, Инструкция по применению

Страница: 9 / 13

3. No Server: The device has been connected to the router, but it cannot connect to the
server (also known as”cannot access the Internet”).
4. Unregistered: The device has not been bound to account. The device needs to be bound
to the eWeLink account to connect to the cloud server. You can bind the device by tap
“Add Device” in the eWeLink APP.
5. Upgrade: Indicates that the device is upgrading the firmware.
6. Setting G1: Indicates that the device is in compatible pairing mode. The device obtains
the necessary information provided by the APP to join the service network, including
router SSID, password, server IP, port number, etc in the setting mode.
7. Setting G2: Indicates that the device is in quick pairing mode. The device obtains the
necessary information provided by the APP to join the service network, including router
SSID, password, server IP, port number, etc in the setting mode.
The device obtains information in different ways in the two modes, read below section for
details.
4.3 The Wi-Fi module basic workflow
1. Configuration
2. Compatible pairing mode: The mobile terminal joins the device AP as a station to form a
local area network to realize data interaction. When the device is in the quick pairing
mode (G state, see details in 4.2 Wi-Fi status indicator light description), press and hold
the pairing button for
5S, the device enters the compatible pairing mode. Click “add
device” on the eWeLink APP, connect the device hot spot in the phone setting page
manually with SSID: ITEA 10000XXXX and password12345678 to connect the device to
the Internet.
3. Quick pairing mode: The Wi-Fi module is in promiscuous mode, and the encrypted
message containing information such as SSID and password from the mobile terminal is
obtained by empty packet capture. The device enters the quick pairing mode by pressing
the pairing button fo
r 5S when it is in the A~D flashing modes. Click “add device” on the
eWeLink APP, enter the SSID and password of the router to connect the device to the
Internet.
4. Online
The module goes through the following process from power-on to connecting to the
server:
1. Join the configured router and connect to the Internet.
2. Connect to the server.
3. Register the device and bind it to the eWeLink account.
4. Obtain device application parameters and stay online.