Sonoff ESP8285-PSF-B, Инструкция по применению

Страница: 6 / 13

6 GPIO12
The relay switch for the first channel: active high, power-on default low
level. Note: As a switch button, there will be a period of high level at
the moment of power-on, which requires a pull-down (1~4.7K) resistor
to ground.
7 STATUS
Wi-Fi status indicator light, connect LED in series with current limiting
resistor to 3V3
8 GPIO15
The relay switch for the fourth channel, active low. APP configuration
pin, when the low level> 5S, enter the pairing mode. Note: The chip
configuration pin needs to pull down (1~4.7K) resistor to ground.
9 GPIO2 Used to program flash UART1_TX
10 GPIO0
The switch for the first channel, active low. APP configuration pin,
when the low level> 5S, enter the pairing mode.
11 GPIO4
The relay switch for the third channel, active high, power-on default
low level.
12 GND GND
13 GPIO9
The switch for the second channel, active low. APP configuration pin,
when the low level> 5S, enter the pairing mode.
14 GPIO10
The switch for the third channel, active low. APP configuration pin,
when the low level> 5S, enter the pairing mode.
15 GPIO11 NC
16 GPIO6 NC