manualshive.com logo in svg

Sono PV 2208, Руководство пользователя, Страница: 30 / 44

Поделиться
Скачать
Sono PV 2208 Скачать руководство пользователя страница 30

PV 2208 User Manual  

                                                 

 

 

30

6 

6 characters per second 

8 

8 characters per second 

10 

10 characters per second 

12 

12 characters per second 

15 

15 characters per second 

20 

20 characters per second 

24 

24 characters per second 

30 

30 characters per second 

Typematic Delay (Msec) 

When enabled, the typematic rate will allow you to select the delay between when the 
key was first depressed and when to acceleration should begin. 
250 

250 msec 

500 

500 msec 

750 

750 msec 

1000 

1000 msec 

Security Option 

This category allows you to limit access to the system and Setup, or just to Setup. 
System 

The system will not boot  and access to Setup will be denied if the 
correct password is not entered at the prompt 

Setup 

The system will boot, but access to Setup will be denied if the correct 
password is not entered at the prompt. 

Note: To disable the security, select PASSWORD SETTING at Main Menu and then 
you will be asked to enter password.  Don not type anything and just press <Enter>, it 
will disable security.  Once the security is disabled, the system will boot and you can 
enter Setup freely.

 

OS Select for DRAM>64MB 

This sub-menu will allow you to access the memory over 64MB in OS/2; the choices 
will be either, Non-OS/2, or OS2. 

Video BIOS Shadow 

Will figure out whether video BIOS will be copied to RAM, it is optional depending 
upon the chipset design.  Video Shadow will increase the video speed. 
Enabled 

Video shadow is enabled. 

Disabled 

Video shadow is disabled. 

C8000-CBFFF Shadow/DC000-DFFFF Shadow 

This category will determine whether option ROM’s will be copied. 
Enabled 

Optional shadow is enabled. 

Disabled 

Optional shadow is disabled. 

 
 
 

Содержание PV 2208













































Отзывы:

Нет отзывов