Quick Start Guide for Tempo Trio (Windows Version)
7
Windows XP Driver Installation
This section describes the installation of drivers to support the Tempo Trio in
systems running Windows XP. If your system is running Windows 98SE, go back
to page 3. If your system is running Windows Me, go back to page 5. If your sys-
tem is running Windows 2000, go back to page 6.
1.
Turn on your computer; during Windows startup, several
New Hardware
Found
pop-ups will appear.
2.
When the
Found New Hardware Wizard
(NEC PCI to USB Enhanced Host
Controller B1) window appears, click Next; the appropriate driver will be
installed.
3.
When the
Completing the Found New Hardware Wizard
window appears,
click Finish.
4.
When the next
Found New Hardware Wizard
(Mass Storage Controller) win-
dow appears, select “Install from a list or specific location (Advanced),” and
then click Next.
5.
When the next window appears asking you to choose your search and instal-
lation options, insert the Tempo Trio Driver diskette into your floppy drive,
and then select “Search for the best drivers in these locations,” and “Search
removable media (floppy, CD-ROM…,” and then click Next.
6.
When the next window appears, select “WinXP Promise…,” and then click
Next.
7.
When the
Hardware Installation
window appears, click Continue Anyway; the
appropriate driver will be installed.
8.
When the
Completing the Found New Hardware Wizard
window appears, eject
the Tempo Trio Driver diskette from your floppy drive, and then click Finish.
9.
When the next window appears, click Yes to restart your system and com-
plete the driver installation. You must now format any attached hard drives.
Skip to “Drive Formatting—Windows XP” on page 14.
Support Note:
Depending on your system’s configuration before you
install the Tempo Trio (for example, you’ve previously installed a USB
card), some of the drivers required to support the Tempo Trio card may have
already been installed. If this is the case, you may not need to perform some of
the steps listed.
