Sonnenkonig 60001012, Руководство пользователя

Страница: 46 / 72

EN
46 46
Do not connect the device to the mains if the device itself or the mains cable or plug are
visibly damaged.
Never attempt to repair the device yourself. If the device does not work properly, please con-
tact the store where you purchased the device. Original spare parts should only be used.
If the power cord is damaged, it must be replaced by the manufacturer or an authorized
service center or a qualified professional.
This unit is equipped with environmentally friendly refrigerant R600a. The refrigerant R600a
is flammable. The components of the refrigeration circuit must not be damaged during
transport or use.
If any part of the refrigeration circuit is damaged, do not place the unit near a fire, naked
lights or spark-producing devices. Immediately contact the store where you purchased the
unit.
If gas is released in your home:
1) Open all windows.
2) Do not unplug the appliance or use the control panel or
the thermostat.
3) Do not touch the appliance until all the gas has disappeared.
4) Failure to do so may produce sparks that ignite the gas.
Keep all components of the unit away from fire and other sources of ignition when disposing
of or decommissioning the unit.
Do not install the unit near volatile or flammable materials (e.g. gas, fuel, alcohol, paints)
and in rooms where air circulation may be poor (e.g. garage).
DANGER OF EXPLOSION! Do not store explosive materials or sprays containing flammable
propellants in your device. Explosive mixtures can explode there.
When unpacking, keep the packaging materials (polyethylene bags, styring pieces, etc.) away
from children. DANGER OF SUFFOCATION!
Only connect the unit to the power supply when all packaging and transport protection de-
vices have been removed.
Operate the device only with 220 ~ 240V AC / 50Hz. All connections and energy-carrying
components must be replaced by an authorized specialist.
Do not use a timer, socket board or multiple socket when connecting the unit to the mains.
A dedicated and properly grounded outlet that complies with the plug data is required to
minimize any type of hazard. The device must be properly grounded.
When moving the unit, make sure that the power cord is not placed under the unit or dama-
ged.
The technical data of your power supplier must correspond to the data on the nameplate of
the unit.
Your domestic power supply must be equipped with an automatic circuit breaker.
Do not modify anything on the unit.
Switch off the power supply before installing the unit and before connecting it to the mains.
DANGER OF FATAL ELECTRIC SHOCK!