Sonnenkonig 40700002, Руководство пользователя

Страница: 50 / 56

50
GB
3 Preparation
• Remove the head unit (#1.1) and all accessories from the packaging. Please check
whether the product is complete and undamaged
• Ensure a pleasant room temperature in the bathroom
• Before using the product for the first time, we recommend that you thoroughly
clean your bathtub so that the mat adheres better to the bathtub floor
• Make sure the head unit is not connected. Place the main unit on the floor or on
a level, stable surface. Make sure that the air inlet on the underside is not covered
• Place the mat (#3) in the bathtub with the air connection on the mat at the foot
end. Press down on each suction cup. Tip: The suction cups adhere better if you
moisten the bottom of the bathtub with a little water
• The suction cups under the mat work perfectly on smooth and shiny tub surfaces.
If your bathtub has a rough or textured surface, please ensure that it does not slip
when entering the bathtub and that there is a possible danger
• Connect the end of the hose (#2.3) to the connector on the mat. Connect the end
of the hose (#2.2) to the main unit and make sure that it is locked counter-
clockwise
• Start filling the bathtub with water. Ensure a pleasant water temperature.
• Do not use bath foam or bath salt
• Plug the power cord into the wall outlet
Suction cups
Connector
Mat
ATTENTION
For safety reasons, the main unit must be placed at least 60 cm from your ba-
thtub. Do not place the main unit so that it can fall easily or be pulled into the
bathtub or onto the wet floor. Always place the unit on dry ground.