Sonnenkonig 20111101, Руководство пользователя

Страница: 53 / 58

53
• Place the heater on a stable surface and switch on the power supply. At this
point, the heater is in standby mode and the display shows the ambient tempe-
rature. Press the button on the housing or the „11“ button on the remote con-
trol, the heater starts to heat at low level, the display shows a „2“.
• Engage 2nd gear: Press the control button on the housing or the „10“ button
on the remote control on the remote control to switch to high heating level,
the display will show „3“ Press again to switch to Press again to switch to low
heating level, the display will show a „2“.
• 3. set the temperature: Press the control button on the housing or the „8“ but-
ton on the remote control to set the temperature. After setting the temperature,
the heater intelligently selects the gear to be used. If you want to select a speci-
fic gear, you can press the button to exit the temperature setting mode.
• 4. Swing/flame effect: Press the control button on the appliance or the „7“ but-
ton on the remote control, the heater will shake its head left and right to sup-
ply air; press the button again to stop the Press the button again to stop the
shaking, press and hold for 3 seconds to turn on the flame and press and hold
for 3 seconds to turn off the flame effect (The flame effect can only be turned
on/off when (The flame effect can only be turned on/off when the entire appli-
ance. off when the entire unit is turned on, and the PTC-2800L does not have a
flame effect light).
• 5. timing: Press the hull button or the „9“ button on the remote control to set
the The time duration is 1-12 hours and can be set to 1 hour/time. hour/time can
be set, and 0 hours means no time setting.
• 6. switch off: Press the control button on the housing or the „11“ button on the
remote control to keep the heater running for 30 seconds. (so that the heater
can completely dissipate the heat) and then switches to standby mode. Please
unplug the heater if it is not going to be used for a long period of time.
• 7. replacing the battery of the infrared control
EN