Sonnenkonig 10500011, Руководство пользователя

Страница: 30 / 33

30
1 Front Grille
2 Spinner
3 Fan Blade
4 Locking Nut
5 Rear Grille
6 Motor Spindle
7
Oscillating Knob
8 Round Base
9
Rotating Switch
10 Screws (3Pcs)
2 Product parts
3 Product Assembly
Base assembly
•
Put the round base on flat ground.
•
Place the bottom of the fan body into the round base, and then fix it with screws (you
find them in a small plastic bag at the inside of the round base). Do not over-tighten
these screws.
How to assemble the fan
•
To assemble the safety grille and blade assembly, remove the spinner (by turning
it clockwise) and then the locking nut (by turning it anticlockwise) from the motor
spindle.
•
Place the rear safety grille into position. Ensure the safety grille fits onto the locating
lugs (Fig. 1). If this is done correctly, the safety grille’s carry handle will be at the top.
•
Fix the safety grille into position by screwing the locking nut back on tightly by hand.
Do not apply force on the locking nut.
•
The groove in the centre of the fan blade aligns with a T-bar on the motor spindle to
ensure correct positioning.
GB