Installation Guide
Page
20
of
26
Connecting the sonnen Power Meter
Important:
The RJ-45 coupling for Modbus line is located on the bottom DIN rail of the
sonnenProtect-Plus enclosure, as demonstrated in Figure 13.
Figure 13: RJ-45 coupling of the Modbus line for connecting the sonnen power Meter.
1-
As the sonnen Power Meter is pre-wired, plug a suitable data cable such as shielded
Cat 6 into the RJ-45 coupling socket in the sonnenProtect-Plus.
2-
Plug in the Modbus cable for the metering to the XSO2 Modbus port on Hybrid 9.53
as illustrated in Figure 14.
Figure 14: Connecting the Modbus line to Hybrid 9.53.