Sonnen 22320, Руководство по установке, Страница: 15 / 40

Mounting | 4
KD-492 | 22320 | EN | X02 15 / 40
4.3 Selecting the installation location
4.3.1 Requirements for the installation location
„
Observe the required ambient conditions (see Technical data [P. 8]).
4.3.2 Observe minimum and maximum distances
• The Backup-Box should be mounted to the right or left of the storage system.
„
Install the Backup-Box at the same level as the top edge of the storage system, if pos-
sible.
15
5 10 - 50
15
10
30 - 50
Illustration 3: Distances to the Backup-Box
(Figure not to scale - all specifications in centi-
metres)
„
Observe the specified maximum distances
between the Backup-Box and the storage sys-
tem, so that the length of the pre-assembled
and supplied cables is sufficient.
„
Observe the specified minimum distances to
the storage system and neighbouring objects,
so that there is sufficient heat dissipation, the
door can be opened easily and there is suffi-
cient space for installation and maintenance
work.
4.4 Mounting the Backup-Box
4.4.1 Requirements for mounting material
„
Use only screws with the following properties:
max. 6 mm
max. 15 mm
8 mm
Illustration 4: Parameters of the screw used
• Screw head diameter: max. 15 mm
• Screw diameter: 8 mm
• Hight of screw head: max. 6 mm
• The screw lengths and the wall plugs used must be suitable for the nature of the wall.
4.4.2 Drilling the holes
A drilling template is part of the packaging of the Backup-Box. Therewith it is
easier to mark the position of the holes on the wall. Please use the holes
marked as ‘base cabinet’ for the Backup-Box.