SONNECT Sound bullet, Руководство пользователя

Страница: 7 / 14

5. XLR Cable Tester
An XLR cable can be plugged into either end of
the Sound Bullet in order to conduct a continuity
test on the XLR pins 1, 2 and 3. To enter (and exit)
this function, press and hold the
SEL button for 2
seconds. To change the pin under test press the
TO button.
Conceptual Diagram
The following diagram sums up the Sound Bullet’s
internal signal flow:
5
* Do not use 48V Phantom Power on a 3.5mm Jack
plugged into the Sound Bullet.