SONNECT Sound bullet, Руководство пользователя

Страница: 5 / 14

1. Signal Generator
When switched on, the Sound Bullet
generates a pink noise signal, which
is routed to the male XLR by default.
A 1 kHz sine wave tone can also be
selected by pressing the
SEL button.
Press the
TO button to route the
generator to the 1/4” Jack and the
internal speaker/Mini-Jack.
The generator’s output can
be adjusted to three levels:
-10, -20 and -40 dBu.
2. 48V check
When plugged into a balanced input
of a sound console, the Sound Bullet
checks for Phantom Power, which is individually
metered on pins 2 and 3. Two dedicated LEDs
will illuminate according to the DIN 45596
voltage standard (48V ±4V). In the event that the
voltage detected is between 24V and 44V, the
LEDs will flash slowly.
2
1
Product Overview