MP5S Writer
快速指引手册
SONIX TECHNOLOGY CO., LTD.
Page 5
Version 06
2
2
2
Online Operation
2.1
Hardware Installation
2.1.1
Installation steps
Insert the transfer board corresponding to the IC to be written into the MP5S, as shown in Figure 2-1.
Figure 2-1
Put the IC into the IC adapter, make pins of the IC correspond to metal pins on the board one by one, as
shown in Figure2-2; (The adapter can be bought from the internet or from Sonix)
Figure 2-2
Insert the adapter into the MP5S, and then connect, as shown in Figure 2-3
Figure 2-3
Note: Place the IC writing seat as shown in the above figure, pin1 of IC is at the upper left, and the pins of IC align
to the pins on the bottom of the MP5S seat.
