SONIQ M301C Скачать руководство пользователя страница 9

 

 

 

-

8

-

 

Remark 
-  The recording speed is 1:1 and according to the actual playing time of the external audio device. 
-  The recording format is preset at – MP3 bit rate : 128 kbps 
-  Do not take out USB or SD device during recording to USB/SD. 
 
Playback of MP3/WMA song via USB storage media or memory card 
The  system  is  able  to  decode  and playback  all  MP3  / WMA  file  which  stored in  the  memory  media  with  USB 
connecting port or SD/MMC memory card. 
 

1. 

Plug-in the USB plug with the face up & make sure it going into completely or insert the memory card in the 
direction of the arrow as shown in the label on the underside of the memory card slot cover. Insert straight 
without bending. 

2. 

Connecting the USB upside down or backwards could damage the audio system or the storage media (USB 
drive, SD or MMC card). Check to be sure the direction is correct before connection. 

3.

 

Insert memory device (USB drive, SD or MMC card), then press FUNCTION button to select "USB" or "SD" on 
display.

4. 

If both of the USB device and SD card are inserted, “USB” and “SD” can be selected on display by pressing 
FUNCTION button. If either USB device or SD card is inserted, only USB or SD will be shown on display. 

5. 

The system will start reading the storage media automatically after function selection.   

6. 

Then the system will start audio playback from desired device (USB or SD/MMC) automatically.   

7. 

During playback from USB or SD, press REC button to switch between tracks encoded by this unit or other 
tracks stored in the USB (or SD) originally. If display shows “NFIL”, it means no file encoded by this unit is 
stored in the USB (or SD). 

8. 

During playback from USB, if only USB device is inserted, then insert SD or MMC card to SD slot, playback 
will be switched to SD slot, and vice versa. 

9. 

PLAY / PAUSE 

Press the PLAY/PAUSE 

  button once to halt playing, press it again to continue. 

10. 

STOP  :  Press  STOP    button  to  end  up  audio  playback,  then  display  will  show  the  total  number  of 
MP3/WMA files. And then user can press SKIP 

  or SKIP 

  button to select file forward or backward. 

11. 

SKIP 

  / SKIP 

  : During MP3/WMA playback, press SKIP 

  button once to play the next file. Press 

and hold SKIP 

  button continuously to speed up selecting forward. Press SKIP 

  button once to play 

the previous file. Press and hold SKIP 

  button continuously to speed up selecting backward.   

12. 

Folder searching: Turn ALBUM UP & DOWN knob to search folder backward or forward. 

13. 

Repeat function: During audio playback, press MODE button once, all tracks in the whole USB drive, SD or 
MMC card will be played repeatedly. Press MODE button again, it will repeatedly play single track. 
 

Remark 
-  If connect the system to MP3 player via the USB socket or SD socket, due to variances in MP3 encoding 

Содержание M301C














Отзывы: