Sonifex S0, Руководство пользователя

Страница: 33 / 48

S0 User Handbook
21
C
ONFIGUR
A
TION OPTIONS
CO N F I G U R AT I O N O P T I O N S
3
Page 1 – Input Select Modes (LED on PPM Scale 1)
Channels 1-4 Input Select Modes are set using the MIC/LINE buttons for each channel.
Mode 1 MIC & LINE inputs available for selection. Phantom power is off (default
for channels 2-4).
Mode 2 MIC & LINE inputs available for selection. Phantom power is on (default
for channel 1).
Mode 3 MIC input only, the button is disabled. Phantom power is off.
Mode 4 MIC input only, the button is disabled. Phantom power is on.
Mode 5 LINE input only, the button is disabled. Phantom power is off.
Channels 5-8 Input Select Modes are set using the INP1/INP2 buttons. INP1 refers to the line
input with the lower number on the channel i.e. on channel 5 INP1 is LINE 5/1. INP2 refers to
the line input with the higher number on the channel i.e. on channel 5 INP2 is LINE 5/2.
Mode 1 INP1 & INP2 inputs available for selection (default for channels 5-7).
Mode 2 INP1 input only, the button is disabled.
Mode 3 INP2 input only, the button is disabled.
Mode 4 INP1 & USB Audio inputs available for selection.
Mode 5 INP2 & USB Audio inputs available for selection.
Mode 6 USB Audio input only, the button is disabled.
Mode 7 INP1 & INP2 & USB Audio inputs available for selection (default for channel 8).
Channel 9 Input Select Modes are set using the TEL/AUX button. AUX1 refers to the AUX
input on the rear panel. AUX2 refers to the AUX input on the front panel.
Mode 1 TEL & AUX1 & AUX2 inputs available for selection (default).
Mode 2 TEL & AUX1 inputs available for selection.
Mode 3 TEL & AUX2 inputs available for selection.
Mode 4 TEL input only, the button is disabled.
Mode 5 AUX1 & AUX2 inputs available for selection.
Mode 6 AUX1 input only, the button is disabled.
Mode 7 AUX2 input only, the button is disabled.
Channel 9 Cleanfeed Control when CUE/PFL TALKBACK is active. This is set using the CUE/
PFL TALKBACK button.