Sonifex S0, Руководство пользователя

Страница: 31 / 48

S0 User Handbook
19
USER GUIDE
U S E R G U I D E
2
Using the Telephone Interface
The Telephone Interface built into the S0 allows you to directly connect a standard analogue
telephone line and telephone handset. You can then route telephone calls through the
S0 mixing desk allowing you to perform telephone interviews, broadcast requests or host
‘phone in’ style programs.
Connect the LINE connector on the rear of the S0 to a standard analogue telephone line
using a suitable cable. Connection to a standard BT phone socket will typically require a
cable with a male RJ11 to a BT phone plug. Connect the HANDSET connector on the rear
of the S0 to a standard telephone handset. If all the connections are correct, on lifting the
telephone handset, a standard dial tone should be heard.
Making A Telephone Call and Routing It Through The S0
1. Connect all cables as described above.
2. Select TEL mode on channel 9. The TEL/AUX button should not be illuminated.
3. Ensure the LINE HOLD button is not selected.
4. Using the telephone handset, dial the required number.
5. When the call is answered, it can be transferred to the S0. Ensure the fader on channel
9 is closed and then press CUE/PFL & TB. This will automatically activate the LINE
HOLD button which will connect the call to the S0. The presenter can talk to the
person on the telephone via microphone channel 1 and listen on the headphones, but
the audio will not be routed to the PGM or REC bus outputs.
6. The telephone handset can now be replaced if required.
7. To put the call to air, open the fader on channel 9. The audio will appear on the
selected PGM or REC output.
8. To terminate the call, close the fader on channel 9 and press the LINE HOLD button to
disconnect the mixer from the telephone line.
Receiving A Telephone Call and Routing It Through The S0
1. When a telephone call is received, the handset will ring, and the LINE HOLD button
will pulse to indicate a caller is waiting.
2. The call can be answered either by lifting the telephone handset, or by pressing the
CUE/PFL button. Ensure the fader on channel 9 is closed. The presenter can talk to the
person on the telephone via microphone channel 1 and listen on the headphones.
Provided the fader is closed, the audio will not be routed to the PGM or REC bus
outputs.
3. If the telephone handset was used, it can now be replaced if required.
4. To put the call to air, open the fader on channel 9. The audio will appear on the
selected PGM or REC output.
5. To terminate the call, close the fader on channel 9 and press the LINE HOLD button to
disconnect the mixer from the telephone line.