Sonifex Redbox RB Series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 160

Sonifex Redbox RB Series Скачать руководство пользователя страница 2

b

Redbox User Handbook No 1

Revision 2.13 June 2012
©Sonifex Ltd, 2000-12
All Rights Reserved

Sonifex Ltd, 61, Station Road, Irthlingborough,
Northants, NN9 5QE, England.

Tel : +44 (0)1933 650 700
Fax : +44 (0)1933 650 726
Email : [email protected] or [email protected]
Web : http://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent
a commitment on the part of Sonifex Ltd. Sonifex Ltd shall not be liable for any loss or
damage whatsoever arising form the use of information or any error contained in this
manual.

No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and
retrieval systems, for any purpose other than the purchaser’s personal use, without the
express written permission of Sonifex Ltd.

Unless otherwise noted, all names of companies, products and persons contained herein are
part of a completely fictitious adaptation and are designed solely to document the use of
Sonifex products.

«
1
2
3
4
...
»

Содержание Redbox RB Series

































































































































































Отзывы:

Нет отзывов