background image

2

Redbox RB-SC2 User Handbook

This handbook is for use with the following product:
RB-SC2 Dual Sample Rate Converter, 24 bit 192kHz
©Sonifex Ltd, 2007
All Rights Reserved
Revision 1.00, April 2007

Sonifex Ltd, 61, Station Road, Irthlingborough,
Northants, NN9 5QE, England.
Tel: +44 (0)1933 650 700
Fax: +44 (0)1933 650 726
Email: [email protected]
Website: http://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent a commitment on the part of the 
vendor.  Sonifex Ltd shall not be liable for any loss or damage whatsoever arising from the use of information or any error 
contained in this manual.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including 
photocopying, recording, information storage and retrieval systems, for any purpose other than the purchaser’s personal 
use, without the express written permission of Sonifex Ltd.  Unless otherwise noted, all names of companies, products 
and persons contained herein are part of a completely fictitious adaptation and are designed solely to document the use of
Sonifex product.

RB-SC2 USER HANDBOOK

RB

-SC2 USER HANDBOOK

Содержание Redbox RB-SC2























Отзывы: