vi
Redbox RB-DA6, RB-DA6G & RB-DA6P User Handbook
INST
ALL
A
TION INFORM
A
TION
INSTALLATION INFORMATION
Installation Information
Atmosphere
The units should be installed in an area that is not subject to excessive temperature
variation (<0°C, >50°C), moisture, dust or vibration.
Electromagnetic Radiation
The cover is connected to earth by means of the fixing screws. It is essential to maintain
this earth ground connection to ensure a safe operating environment and provide
electromagnetic shielding.
Fitting Redboxes
Redboxes can be fixed to the underside of a mixing desk, or other surfaces using 4.2mm
holes in the sides and fixed with 2 x M4 screws or 2 x No. 6 countersink wood screws.
They can also be rack-mounted, with either the front, or rear of the Redbox positioned at
the front of the rack:
Rear Mounting The RB-DA6, RB-DA6G & RB-DA6P:
The
RB-RK3
1U rear panel rack kit
can be used for large Redboxes such as the RB-DA6, RB-DA6G & RB-DA6P.
Fig D: RB-RK3 Large Redbox Rear Rack-mount Kit.
Note: When fitting the rear-mounting rack-kits, a notch has been left on the inside of
the right-hand rack-piece for the mains cable to pass through. Make sure that the mains
cable has been put through the notch before attaching the right hand rack-piece.