Sonifex PC-FM6-32, Руководство пользователя

Страница: 13 / 24

5
Configuration 1
The Tuner application also provides relative signal strength indicator bars
on each station, which may be useful when orientating antennas. Note
however that due to hardware limitations, this function is not available with
the older 2-channel FM Radcap cards.
The frequencies set are stored in the Windows Registry by the driver and
are automatically restored whenever the PC is started. It is not necessary to
rerun Tuner or to leave it running once the frequencies are set.
Alternatively, if you write your own software, there is a DLL supplied on
the driver disc that can be used for setting and retrieving the station
frequencies. Refer to Appendix A for details. This DLL (Radcap.dll) is
compatible with the AM Radcap and older-style two-channel, six-channel
and twenty-four channel FM Radcap
cards as well, and should be used in
place of the earlier versions supplied with
those cards.
Radcap Connect
Radcap Connect is an application that
allows the stations on AM and/or FM
Radcap cards to be routed to multiple
audio output devices. The number of
stations that can be simultaneously
played is limited only by the number of
audio output devices present on the PC.
Radcap Connect is included on the driver
CD/download. To install this application,
insert the CD and run \
AM & FM
Radcap\Radcap Connect\setup.exe.
Windows 7 and 8 provide similar
functionality with their Listen option
under the Recording device properties,
allowing each station to be monitored on
a designated audio output device.
Fig 1-3: FM Radcap Monitor Screen