manualshive.com logo in svg

Sonifex DHY-04, Руководство пользователя, Страница: 39 / 56

Поделиться
Скачать
Sonifex DHY-04 Скачать руководство пользователя страница 39

29

Webserver      6

Digital Share Master 

- Allows 2 x DHY-04 units to share a digital audio 

connection by connecting the right hand channel of the digital audio input 
and output data to the Conference Port.

Digital Share Slave

 - Retrieves the incoming audio and presents outgoing 

audio to the Conference Port.

Force Analogue Output 

The Main Output of the unit will follow the input type unless this option is 
selected when the output is always analogue.

Note it is not possible to output digital audio without a digital input being 
present. 

Save Cancellation Coeffs 

To tune the system we recommend pre-loading the cancellation coefficients 
to allow the unit to optimise the speed of the echo cancellation. Use this 
option to save the current values after a call has been made with good 
cancellation.

A call to a telephone that has a muted microphone pick-up whilst still 
sending audio from the DHY-04 is ideal for this.

NOTE: If the DHY-04 settings for Country Code or Echo Length are changed 
then the coefficients will be cleared.

Содержание DHY-04

























































Отзывы:

Нет отзывов