Sonifex DHY-04 страница 2 Скачать руководство пользователя

Страница: 2 / 56

DHY-04 Handbook

Made in the UK by

This handbook is for use with the following product:

DHY-04 Single Freestanding Automatic Digital TBU, AES/EBU & Analogue I/O With Ethernet

DHY-04S Single Rackmount Automatic Digital TBU, AES/EBU & Analogue I/O With Ethernet

DHY-04T Twin Rackmount Automatic Digital TBU, AES/EBU & Analogue I/O With Ethernet

©Sonifex Ltd, 2017

Revision 1.05, November 2017

Sonifex Ltd, 61, Station Road, Irthlingborough,

Northants, NN9 5QE, England.

Tel: +44 (0)1933 650 700

Fax: +44 (0)1933 650 726

Email: [email protected]

Website: http://www.sonifex.co.uk

Information in this document is subject to change without notice and does not represent a

commitment on the part of the vendor. Sonifex Ltd shall not be liable for any loss or damage

whatsoever arising from the use of information or any error contained in this manual.

No part of this manual may be reproduced or transmitted in any form or by any means, electronic

or mechanical, including photocopying, recording, information storage and retrieval systems, for any

purpose other than the purchaser’s personal use, without the express written permission of Sonifex

Ltd. Unless otherwise noted, all names of companies, products and persons contained herein are part

of a completely fictitious adaptation and are designed solely to document the use of Sonifex product.

For the latest Sonifex handbook information please visit the
Sonifex website at www.sonifex.co.uk

Содержание DHY-04

























































Результаты поиска

Содержание DHY-04

Отзывы:

Похожие инструкции для DHY-04

Бренды по названию

Популярные бренды

Sonifex DHY-04, Руководство пользователя

Результаты поиска

Содержание DHY-04

Отзывы:

Похожие инструкции для DHY-04

Бренды по названию

Популярные бренды