AVN-DIO09 Handbook
6
Technical Specification For AVN-DIO10
w w w . s o n i f e x . c o . u k
t:+44 (0)1933 650 700
f:+44 (0)1933 650 726
[email protected]
To remove a connec�on simply click on the green �ck.
Transmit and receive channels in a diagonal can be quickly routed together
by holding
Ctrl
and clicking on the minimise/maximise bu�on on the rou�ng
grid.
Device View
Open up the
Device View
by double clicking on the device name in the
rou�ng grid.
Status
Within the
Status
tab, informa�on about the device can be seen, such as
the product type and the current IP address.
Fig 1-9: Status
Device Configuration
Within the
Device Config
tab the following can be modified.
• Device Name
• Sample Rate
• Encoding
• Clocking
• Device Latency
An op�on is also available to clear the configura�on, rese�ng all se�ngs to
their default values.
Fig 1-10: Device Config
Microphone XLR Input Pin-out
Pin
Func�on
1
Chassis Ground
2
Input Phase
3
Input Non Phase
Power Supply - Class 0 802.3af PoE
Device
Power Consump�on (Wa�s)
DIO09
< 6 W
Microphone Input - XLR
Parameter
Descrip�on
Input Impedance:
2.2kΩ balanced
Maximum Input Level:
-68dBu (max gain) to -8dBu (min gain)
Gain
Adjustable 20dB to 86dB
Frequency Response:
20Hz to 20kHz, +0/-0.5dB (ref 1kHz)
High Pass Filter Response:
Fc = 125Hz @ 6dB per octave
THD+N:
<0.01%, -32dBu input, 40dB gain, 20Hz to
20kHz, 20kHz BW
E.I.N.:
129dBu, 20kHz BW, max gain, Rs=200Ω
Common Mode Rejec�on:
>60dB @ 1kHz
Phantom Power
+48V ± 4V
Dante
Parameter
Descrip�on
Sample Rates:
44.1kHz, 48kHz, 88.2kHz, 96kHz
Encoding:
PCM 16, PCM 24, PCM 32
PoE Power
Standard
802.3af
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
4 W
Max PSE Power Usage
15.4 W
Equipment Type
AVN-DIO09:
Microphone Input to Dante®
Physical Specifica�on
Dimensions (Raw):
10.6cm (W) x 7.3cm (D) x 4.3cm (H)
4.2” (W) x 2.9” (D) x 1.7” (H)
Dimensions (Boxed):
17.4cm (W) x 9.5cm (D) x 5.6cm (H)
6.9” (W) x 3.7” (D) x 2.2” (H)
Weight
Ne�: 0.2kg Gross: 0.3kg
Ne�: 0.44lbs Gross: 0.66lbs
