SMA 210/410 Deployment Guide
Connecting the SMA on a New DMZ
2
6
Connecting the SMA on a New DMZ
The following procedures explain how to configure your gateway appliance on a new DMZ:
•
Connecting the SMA to the Gateway
•
Allowing a WAN to SMA Connection
•
Allowing an SMA to LAN Connection
Connecting the SMA to the Gateway
To connect the SMA 210/410 using Scenario A:
1 Connect one end of an Ethernet cable to an unused port on your SonicWall gateway appliance.
2 Connect the other end of the Ethernet cable to the X0 port on the front of your SonicWall Secure Mobile
Access 210/410. The X0 Port LED lights up indicating an active connection.
3 Configure the SMA X0 IP address. Refer to
Allowing a WAN to SMA Connection
To allow a WAN to SMA connection:
1 Click the
Wizards
icon in the top right corner of the gateway appliance management interface.
NOTE:
Before continuing, you must add a new SMA custom zone. Refer to
for more information.
