SonicWALL Pro 1260, Руководство пользователя

Страница: 9 / 30

Page 8
DHCP
The Setup Wizard screen should display:
WAN Network Mode: NAT with DHCP Client
If you selected DHCP, you do not need to enter any WAN networking settings. The
network settings are provisioned automatically from a DHCP server.
Click
Next .
PPPoE
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPPoE Client
Click Next .
PPTP
The Setup Wizard screen should display:
WAN Network Mode - NAT with PPTP Client
Obtain an IP Address
Automatically Select this if your ISP assigns you a dynamic IP address.
Use the following
IP Address Select this if your ISP has assigned you a static IP address,
and enter the address.
PPPoE User Name Enter the user name for your Internet account. Your ISP may
require you to enter your username in e-mail address format,
including “@” and the domain name, for example,
joe.user@sonicwall.com.
PPPoE Password Enter the password for your Internet account.
Inactivity Disconnect
(minutes) Check this box if you want the SonicWALL PRO 1260 to
disconnect from the Internet if there is no traffic for the
number of minutes you enter.
PPTP Server IP
Address Enter the address of the PPTP server.
PPTP User Name Enter your network user name.
PPTP Password Enter your network password.
Obtain an IP Address
Automatically Select this if the server assigns you a dynamic IP address.
Use the following
IP Address Check this if you have been given a static IP address, and fill
in the following three fields.