SonicWALL CDP 1440i, Руководство по началу работы

Страница: 15 / 41

Page 14
Configuring Static IP Address
Alert:
Once the IP address of your SonicWALL CDP appliance is changed, you
will not be able to access the appliance without this address. Before
continuing, enter the chosen IP address for your SonicWALL CDP
appliance in the space provided below
1. On the Network > Settings page of the Web Management interface, click the
Configure icon in the Interfaces table.
2. In the IP Address field, enter an unused static IP address that is within the range of
your local subnet and click the OK button.
Note:
Using an IP address within the range of a local subnet is usually accomplished
by keeping the first three series of numbers (xxx.xxx.xxx.xxx) of the LAN IP
address the same. As an example, if your LAN IP address is 10.10.10.1, you can
set your SonicWALL CDP appliance IP address to 10.10.10.20.
3. Press the Submit button to submit the IP address change.
Your SonicWALL CDP appliance is now set to communicate with your network using a
static IP address. Disconnect your management computer from the SonicWALL CDP
appliance, and continue to the next section to connect the SonicWALL CDP appliance to
your local area network.
Note:
You may lose connectivity with the SonicWALL CDP appliance during an IP
address change. This occurs because the SonicWALL CDP appliance is now on
a different subnet than the management computer.
My new SonicWALL CDP IP address is:
See “Networking Information” on page 4
______.______.______.______