3
IMPORTANT SAFEGUARDS
READ BEFORE INSTALLING OR
USING THE EQUIPMENT
Your Ultrasonic Atomizer has been designed with safety in mind. However, no design
can completely protect against improper usage, which may result in bodily injury and/or
property damage. For your protection and equipment safeguard, observe the following
warnings at all times, read the operating instructions carefully before operating the
equipment, and retain this instruction manual for future reference. If the atomizer is used
in a manner contrary to that specified in this instruction manual, the protection features
designed into the unit may be impaired.
•
When mounting the atomizer in a stand, always clamp the converter housing. Never
clamp the probe.
•
High voltage is present in the power supply. Do not remove the cover. Refer all
servicing to qualified service personnel.
•
To avoid electric shock, disconnect the electrical power cord before removing the
cover prior to servicing.
•
Never operate the power supply unless it is connected to the converter.
•
Never secure anything to the probe.
•
Never touch a vibrating probe.
•
Never allow an atomizing probe to vibrate in air for more than 10 seconds without
liquid flowing through it.
