7
The
EXPRESS
link
3
was tested to comply with the requirements
of EN 60601-1:2006. This standard addresses electrical safety
of medical electrical equipment and covers also its electromag-
netic compatibility for a typical health care environment. Please
note that some devices (cell phones, cordless phones, WLAN
systems, other intentional radiators) might generate electro-
magnetic emissions that exceed the tested limits and might
influence the operation of the
EXPRESS
link
3
. In the event of
such interference enlarge the distance between the
EXPRESS-
link
3
and the interfering device.
6
OPERATION
Connecting and fitting hearing instruments
For information on how to configure EXPRESS
link
3
in the fitting software
and how to connect and fit hearing instruments, please refer to the instal-
lation manuals or to the help files with your fitting software.
Some products may require a fresh battery in order to be con-
nected and fit with the programming device, while other prod-
ucts require the battery to be removed in order to be connected
and fit with the programming device. To find out which prod-
ucts need a battery inserted and which products may not have
batteries inserted, please refer to the product information, the
installation guides, or help files included with the fitting soft-
ware or contact your local sales representative or support.
Typically, EXPRESS
link
3
only needs to be configured once as default
programming interface. The next time you can just launch the fitting
software and start fitting hearing instruments.
