8
DISASSEMBLY PROCEDURE is
the reverse order of the assembly
procedure.
Power cable must be removed
prior to disassembly.
Disassemble the unit following the
assembly sequence in reverse
order from #5 to #1.
5
6
Plug the power cord, at the rear of the unit, into the electrical outlet. The sensor of the unit is
automatically initialized 5 seconds after plugging the power cord into the socket.
Press the “
POWER
” button on the control panel of the unit while standing on the unit with feet
shoulder width apart and posture erect.
Press the “
MODE
” button on the control panel and choose the Auto Program Mode or
the Manual Program Mode
IN MANUAL MODE
AUTO MODE
Plug the power cord into the electric
socket.
NOTE:
Be sure nothing is on the plate
when you plug the cord into the wall
socket.
Press
TIME
Button to turn on the remote
Initial time is set to 10 minutes.
Press
START/STOP
Button the Start the unit.
Adjust
INTENSITY (L1~L5)
, and adjust
FREQUENCY (4~50Hz)
to your choice.
Press
START/STOP
Button again to stop
operation.
ONLY step down from the
platform after it stops completely.
Press
POWER
Button to put unit into
standby mode.
After pressing the
MODE
Button, select the
program you want:
Whole Body, Upper Body,
or Legs.
(Initial mode is set at
Whole Body
.)
Press
START/STOP
Button the Start the unit.
Press
INTENSITY
Button to adjust intensity.
Time is set to 10 minutes. You can change
intensity and frequency during operation.
Press
START/STOP
Button again to stop
operation.
ONLY step down from the
platform after it stops completely.
Press
POWER
Button to put unit into standby
mode.
Assembly #5 - Disassembly #6
2
3
1
PERSONAL VH-11
Operating Instructions
2
3
1
4
5
6
7
8
4
5
6
7
8
9
CAUTION:
Nothing can be on the plate
when you plug the cord into the wall socket.
DO NOT put anything (or person) on the
plate before you hear the “Ringing” sound.
If you have left anything on the plate before
you hear the “Ringing” sound, take the
items off the plate and unplug, then re-plug
the unit’s power cord into the socket.
