i-F2 FCC Regulations
FCC Declaration of Conformity Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause interference to radio or television reception,
which can be determined by turning the equipment off and then on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to a different outlet so that the equipment and receiver are on
different branch circuits.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Sonic Impact could void the user
’
s authority to
operate the equipment.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
Sonic Impact Technologies LLC
©
Sonic Impact Technologies LLC
2555 State Street
i-F2 is a trademark of Sonic
San Diego, California 92101
Impact Technologies LLC
USA
iPod
®
is trademark of Apple
Computer, Inc., registered in the
www.si-technologies.com
U.S. and other countries
Important operating and maintenance (servicing) instructions.
CAUTION: To prevent electrical shock do not use the (polarized) plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to prevent blade exposure.