background image

1.

Ventilation - Although your 

LINE Series

Preamplifier generates

only nominal heat in use, be sure that the ventilation slots in the
top cover have 

at least

6” of unobstructed air space above them.

Do Not obstruct the bottom vent by operating the preamplifier on
carpet or with the rubber feet removed.

2.

Water and Moisture - This product should not be used near

water. Do not expose this product to rain or moisture to prevent
fire or shock hazard.

3.

Heat - This product should be situated away from heat

sources such as radiators, heat registers, stoves, or other appli-
ances which produce heat.

4.

Power Sources - This product should be connected to an AC

power source of the proper rated voltage. The original shipping
containers will stipulate the AC voltage this unit can operate with
correctly.

5.

Cleaning - A regular dusting with a soft, non-abrasive cloth

will generally keep the finish of the faceplate and chassis looking
like new. At no time should you allow any liquid to come in con-
tact with the

LINE Series

Preamplifier and Power Supply; it may

run into the electronic circuitry and cause damage which will not
be covered under your warranty.

6.

Servicing - Do not open this product. 

No user serviceable

parts inside.

Refer servicing to an authorized service technician.

7.

Non-Use Periods - The power cord of this product should be

unplugged from the outlet when left unused for an extended peri-
od of time.

8.

Do not remove Preamplifier or Power Supply covers while unit

is connected to an AC power source. 

PACKING MATERIALS

We recommend that you retain all of the packing material and
shipping boxes for your

LINE Series

Preamplifier and Power

Supply. They are custom designed to prevent shipping damage
from occurring. Sonic Frontiers, Inc. will accept no responsibility
for any damage occurring to a 

LINE Series

Preamplifier and

Power Supply that is shipped in packing material other than the
original Sonic Frontiers packing material.

DISCLAIMER OF LIABILITY

Under no circumstances does Sonic Frontiers, Inc. assume liabili-
ty or responsibility for injury or damages sustained in the use or
operation of this equipment or for damages to any other equip-
ment connected to it.

Sonic Frontiers, Inc. reserves the right to make design changes or
improvements without the obligation to revise prior versions. All
specifications are subject to change without notice.

LIMITED FIVE YEAR WARRANTY

Sonic Frontiers, Inc. warrants to the purchaser that each Line
Series Preamplifier and Power Supply is free of manufacturing
defects for a period of five (5) years from the date of purchase.
This five (5) year limited non-transferable warranty excludes all
vacuum tubes, which we warrant for a period of twelve (12)
months. To receive this warranty, the original purchaser must
complete and mail to Sonic Frontiers, within thirty (30) days from
the date of purchase, the enclosed Warranty Registration Form.
Sonic Frontiers, Inc. will then validate the warranty to the original
purchaser. This warranty is subject to the following conditions
and limitations:

1.

Warranty applies only to the original purchaser.

2.

This warranty is void and inapplicable if the product has been

handled other than in accordance with the instructions in this
Owner’s Manual, abused or misused, damaged by accident or
neglect or in being transported, or the defect is due to the prod-
uct being tampered with, modified or repaired by anyone other
than Sonic Frontiers, Inc. or an authorized Sonic Frontiers repair
depot.

3.

Warranty does not cover normal maintenance.

4.

Sonic Frontiers, Inc. shall not be responsible in any way for

consequential or indirect damages or liabilities resulting from the
use and operation of the product covered herein or resulting from
any breach of this warranty or any implied warranty relating to
said product.

During this period, Sonic Frontiers, Inc. will repair or replace any
defective components free of charge. A Return Authorization
Number (RAN) is required before any product is returned to our
factory for any reason. This number must be visible on the exteri-
or of the shipping container(s) for Sonic Frontiers to accept the
return.

Units shipped to us without a Return Authorization Number or
without a visible RAN on the exterior of the shipping container(s)
will be returned to the sender, freight collect.

Units to be repaired by Sonic Frontiers, Inc. must be sent ship-
ping and insurance prepaid by the original purchaser in the orig-
inal packing material. A returned product should be accompa-
nied by a written description of the defect. Repaired units will be
returned by Sonic Frontiers, Inc. shipping and insurance prepaid.

All other warranties or conditions either written, verbal, expressed
or implied are void.

Note:  In foreign markets (anywhere outside of Canada and the USA),
the warranty is supplied by the authorized International Distributor.
Exact terms and conditions may vary.

13

SAFETY INSTRUCTIONS

Содержание INE 1



















Отзывы: