RHK900 (SBT625ss) for USA Updated: 16-12-2014
INSTRUCTIONS
Features show on diagram above:
1.
PM indicator Time Set
2.
Alarm 1 indicator
3.
Snooze / Dimmer
4.
Alarm Mode Switch (Off, Buzz, VIB)
5.
Alarm Selector (AL1, AL2)
6.
Tone Slider
7.
Time
8.
Fast
9.
Slow
10.
AL. Set
11.
AL. OFF
12.
Volume
13.
Alarm 2 Indicator
14.
DC5V input
15.
Back Up Battery Cover
16.
USB Charging
17.
Vibrator Input
Test Mode:
1)
Press and hold the
Snooze (3)
and
Time buttons (7)
for 3 seconds to enter the Test Mode. The
display will show "7ES7" to indicate it is in TEST Mode. To demostrate the unit function as
follows:
a)
Slide the
Alarm Mode Switch (4)
at OFF position, there will be a „VEE“ sound.
b)
Slide the
Alarm Mode Switch (4)
at BUZZ position, there will be a „BEEP“ sound.
c)
Slide the
Alarm Mode Switch (4)
at VIB position, the vibrator will vibrate.
d)
Slide the
Alarm Mode Switch (4)
at BUZZ & VIB position, there will be a „BEEP“ sound
and the vibrator will vibrate.
2)
If within 1 minute no button is pressed, then it will exit the Test Mode and return back to the
Time Mode.
3)
To exit the Test Mode immediately, press any button (except the Snooze & Time buttons,
which has no effect).
Setting the correct time –
1)
Press and hold the
Time Button (7)
at the same time press the
Fast Button (8)
to advance the
clock display rapidly until the hour is correct.
2)
Press and hold the
Time Button (7)
at the same time press the
Slow Button (9)
to advance the
clock display rapidly until the minute is correct.
A
lighted dot (1)
in the upper left of the clock display indicated the time is PM. For AM time
indication, the dot does not light up.
Setting the Alarm Time –
Setting Alarm 1
1)
Slide
the
ALARM SELECTOR SWITCH (5)
to AL1 position, the alarm indicator
AL1 (2)
will light
up.
2)
Press and hold the
ALARM SET (10)
and the
FAST Button (8)
or the
SLOW button (9)
to advance
the clock display until you reach desired alarm setting.
