23
DOORBELL TRANSMITTER SET UP
Continued
Step 2) Installation to Existing Powered Door Chime
With this method you can install the HomeAware™ transmitter to
your existing AC powered doorbell chime. This method allows
you to use the existing doorbell button so there aren’t two
buttons outside.
Use the provided connector wire to connect the doorbell
transmitter to your existing AC powered chime box. Remove
chime box cover and connect the red and white wires to the
existing terminal screws (common and front) if connecting to the
front door. Otherwise connect the red and white wires to the
(common and rear) screws for the rear door.
Next, plug the jack at the opposite end of the wire into the input
on the side of the doorbell transmitter. To test press the existing
doorbell button in your home, if the red LED lights up the
installation was successful. If the red light does not light up
check the wiring again, check if chime box has power, also was
the existing chime working before you installed the wire? Please
note not all doorbell chime boxes will work with the transmitter.
Mounting the Doorbell Transmitter
Use the provided hardware kit to mount the transmitter. See
diagram above for doorbell transmitter set up.