sonible missing link ml:1, Руководство пользователя

Страница: 4 / 14

ml:1 user guide
4
Overview
Front panel
Transformer balanced XLR (analog) output
connectors (wired with pin-1 ground, pin-2
hot and pin-3 cold) provide a balanced 600 to
800 Ohm high level analog signal
.
1.1.1.1.1.1.1.1.1 Unbalanced ¼ ” jack inputs (switched, 600
Ohm), appropriate for line signals, ring and
sleeve are tied to ground internally.
Transformer balanced XLR digital AES/EBU
output connector
.
Lockable Neutrik® USB (B-type) receptacle,
compatible with every B-type USB plug.
Status LED. Lights up in white if the
connection to the USB host is established.
Switches
Test tone generator switch (momentary),
generates a multitone on the analog outputs
when toggled for longer than one second. The
initial delay prevents accidental activation of
the signal generator. The test tone will be
active on the outputs as long as you keep the
switch toggled.
Pad switch, attenuates analog output signals
(except test tone) by 18dB to ensure a
distortion-free signal with high gain inputs.
Ground lift switch, breaks the internal ground
connection of every pin 1 of the analog outputs
to isolate the analog signal ground of the ml:1
outputs from any input ground. This safely
eliminates ground loops and reduces ground
loop induced humming to a minimum.
1
2
3
4
5
6
7
8