8
C - REMOTE CONTROL -
FUNCTIONS
PREDEFINED VALUES
The P8106 kit leaves the factory with predefined values for Volume, Bass and Treble, that can be modified by means
of the activation of the volume keys 11 (VOL- VOL+), the bass level, keys 12 (BASS- BASS+) or the level of treble,
keys 13 (TREB- TREB+). Its action is indicated by the flashing of the receiver led that, upon reaching the limits (mini-
mum and maximum values) stops flashing.
To recover the pre-defined factory values, press key 7 (IDEAL), automatically adjusting the three values, indicated
by a beep and a flashing of the receiver led.
SUPERBASS FUNCTION
To connect or disconnect the SUPERBASS function, reinforcement of bass, press key 9 (SB).
The connection is indicated by a beep and a flashing of the receiver led.
The disconnection is indicated by two beeps and a flashing of the receiver led.
QUICK OPERATION GUIDE:
Once the kit is installed, with the receiver in the STAND-BY mode, with the led off, keep key 4 (STORE) pres-
sed for three seconds, for the AUTOSEARCH to start (see page 6).
Then start the normal functioning, pressing key 1 (ON / OFF) then being able to select any radio station, as
with the automatic search up to 30 radio stations are sequentially stored.
For the selection of deletion of radio stations stored during the autosearch, use the corresponding functions
indicated in this manual.
