6
C - REMOTE CONTROL -
FUNCTIONS
START
Press key 1 (ON/OFF) pointing the remote control to the infrared receiver, located next to any of the two loudspea-
kers.
Connection: press key 1 (ON-OFF), and the receiver led will be lit up. Led lit up - normal functioning
Disconnection: press key 1 (ON-OFF), and the receiver will be switched off, remaining in STAND-By
mode, memorising the last radio station tuned and saving the values corresponding to volume, bass and treble.
AUTOMATIC MEMORISATION OF RADIO STATIONS - AUTOSEARCH
In order to carry out this memorising process, the receiver should be in the STAND-BY mode, with the led
off.
By maintaining key 4 (STORE) pressed for three seconds, the AUTOSEARCH begins, in which the receiver con-
nects, the led lighting up, and starts searching for all the radio stations in order, from the beginning to the end of the
band, sequentially memorising them in the tuner memories, starting with number 1 to a maximum of 30.
Once the process is over, the receiver beeps twice and switches off. Every time the AUTOSEARCH process is
carried out, the previously memorised frequencies are deleted and replaced by the new ones.
MANUAL MEMORISATION OF RADIO STATIONS
Press key 4 (STORE) and then the desired quick memory key 6 (from 1 to 7). The correct memorisation is indica-
ted by beeping three times. If you wish to cancel the operation, before pressing the quick memory key, simply press
the STORE key again. Once the radio stations have been selected, by simply pressing any of the keys 6, numbe-
red from 1 to 7, the memorised radio station will be heard. Apart from memorising up to 7 direct dialling radio sta-
tions, more radio stations can be memorised, up to a maximum of 30, by pressing key 4 (STORE) and then key 10
(PR+), memorising the selected frequency in the first free memory slot existing. If there are no free memory slots
because the maximum number has been reached, this is indicated by emitting a longer deeper beep.
