Cód: 8050V2 MA
Y20
Warnings
Safety instructions
- Before installing the control, make sure that the
environmental conditions are the necessary, working
temperature, humidity, pollution and emission of gases,
since any of these factors can affect its correct operation.
- The electrical connections can only be those indicated in
this manual and on the device connection label.
- It is an independent control device for surface mounting
on a 60 mm diameter junction box.
- Assembly, electrical connection, commissioning and
maintenance should only be carried out by qualified
personnel.
- This control is not a safety device, nor can it be used as
such, it is the responsibility of the installer to incorporate
the appropriate protection to each type of installation
(approved).
- For any manipulation, either while installing or repairing,
the control must be disconnected from the mains.
UNE-EN 60730-2-1: 1998 + A11: 2005
- In case of visualizing possible defects in the device that
could cause damage or a malfunction in the
installation, do not connect the device.
- In case of doubts about its operation or its correct
installation, do not connect the device to the mains and
consult a professional technician.
- Sonder Regulación S.A. reserves the right to make
changes related to the product, technical data, or
assembly and use instructions without prior notice.
Designed and manufactured according to:
UNE-EN 60730-1 + A1: 2005 + A12: 2004 + A13: 2005
Warranty conditions
This device has a 3-year warranty, it is limited to the
replacement of the defective part and will be delivered in
the same material reception conditions, packaging,
batteries, instructions or any other accessory that
includes this product will not be replaced.
We decline all responsibility for damaged devices, as a
result of mishandling, omission of the warnings in this
manual or technical ignorance of the installation's needs.
If the repair is out of warranty, the user will be informed
of the feasibility and cost of it. The valuation of our
technical department may involve an additional cost for
the user.
For any repair under warranty it is necessary to present
the documentation proving the purchase of the product
within the term of validity of this warranty and a
description as exact as possible of the defect or the
anomalous behavior of the product according to the user.
Modified devices without prior agreement with the
manufacturer.
Appliances with natural wear or improper use of the
equipment.
Compensation requirements due to loss of earnings,
compensation for use as well as indirect damages,
provided they are not mandatory under the law
Devices whose deterioration is the result of crashes or
liquid or gaseous emanations.
The costs resulting from the shipment or receipt of the
material.
Devices whose connection or use have not been
executed according to the instructions attached to the
device.
They are out of warranty:
Devices whose serial number has been damaged,
deleted or modified.
Directive 2012/19 / EU on waste electrical and
electronic equipment (WEEE)
The product and its
packaging must be disposed of at the corresponding
recycling center
MADE IN
SPAIN
3
años
RoHS
Compliant
