Sonation PRSO-V2-PF, Руководство оператора

Страница: 6 / 16

Page 6
Column Oven PRSO-V2-PF User manual
2 Product description
2.1 Scope of delivery
The article “PRSO-V2-PF” contains all needed parts for use of the oven. To mount the oven to the respective ion source
a seperate mounting kit is needed. The available mounting kits are marked as “(optional)” in the following list:
ƒ
1 x Column oven (top and bottom part)
ƒ
1 x Controller
ƒ
1 x Oven control cable
ƒ
1 x Data cable for RS232 and contact closure
ƒ
1 x USB to serial adapter
ƒ
1 x 24V power supply with wide range input and power cable (with EU, CH, UK or US plug)
ƒ
1 x USB flash drive with software
ƒ
1 x This manual
ƒ
(Optional) Mounting kit for Thermo Fisher Nanospray Flex™ Ion Source ES071 and ES072 (P/N PRSO-V2-KPF-FIS)
2.2 Overview
The column oven for PharmaFluidics µPAC™ nanoLC columns “PRSO-V2-PF” allows the heating and temperature control
of PharmaFluidics µPAC™ nanoLC columns. Throughput is increased by higher temperatures and more accurate results
are achieved by the constant column temperature.
The optional mounting kits are to attach the oven to the existing source.
Column Oven (top and bottom part)
❶ ❶ PRSO-V2 - Top part ❷ ❷ PRSO-V2 - Bottom part ❸ ❸ Locking bar
❹ ❹ Column outlet ❺ ❺ Column compartment ❻ ❻ Column inlet
❼ ❼ Grounding pin
The oven itself consists of two main parts. The upper part contains the heating/cooling unit, the heat sink and the cool -
ing fan. This part is connected to the oven controller. The lower part holds the column and provides the in- and outlet
for the column. On the underside of the bottom part the grounding pin and the fixing holes for the mounting kit are
located.
7
6 5 4
3
2
1
Fig. 1: Column oven (top and bottom part)