Page 12
Column Oven PRSO-V2-PF
User manual
4.2 Using CO-Control
When the software is started the “Main” tab is displayed in the software window (Fig. 10).
On the “COM Ports” tab choose the port the controller is connected to and click “connect”. Now you should see the
current temperature of the oven in the display in the upper right.
If no temperature is displayed, please ensure that the top part of the oven sits properly on the bottom part. If the oven
is not properly closed, the temperature readout will show -999°C.
In the “Main” tab you can adjust the two temperature setpoints “Temp. normal” and “Temp. high”. By clicking “Switch
regulator on” the regulator starts to heat or cool the oven to one of these setpoints, depending on the state of the
contact closure input. To visualize the temperature profile, a graph window can be displayed. To open the graph win
-
dow, choose “Options > Show Graph” from the main menu. In the settings window under “Options > Settings” the graph
window can be shown automatically on startup.
It is possible to unlock an extended temperature range. If your application requires higher or lower temperatures,
please ask Sonation for an option code. But also keep in mind that a higher temperature range is stress for the Pelti
-
er-modules and the separation column and can lead to a shorter lifetime.
Fig. 10:
Oven control software CO-Control
