Sonatest Wave Скачать руководство пользователя

Страница: 82 / 117

Wave User Manual

Version 4

Figure 66

–

The sections for the Inspection Summary tab

By default, the fields are empty; they have to be entered manually.

13.4.3.1

Description

This field is designed to allow you to write down a summary of the inspection. You have
a limit of 1000 characters, including line breaks. If the limit is reached, it will not be
possible to add more text.

Note that line breaks may affect the layout even if the number of characters is not
reached. If this is the case, by clicking on the

Preview

button, a pop-up appears on the

screen indicating that the text is too long and will be truncated in the PDF report.

Figure 67

–

The pop-up that warns the description will be truncated.

13.4.3.2

Inspected by and Approved by

The purpose of this section is to identify the people who inspected and approved the
report.

Содержание Wave






















































































































Результаты поиска

Содержание Wave

Отзывы:

Похожие инструкции для Wave

Бренды по названию

Популярные бренды

Sonatest Wave, Руководство пользователя

Результаты поиска

Содержание Wave

Отзывы:

Похожие инструкции для Wave

Бренды по названию

Популярные бренды