User Manual for the Type 8300 Compatt 6
(and Variants)
UM-8300-Compatt 6
Issue B3
12. Inspect the condition of the O-ring
seals; replace if necessary.
Figure 8–16 Removing the Sensor Endcap
13. While pulling off the sensor endcap, support the chassis without touching the printed circuit
boards.
14. Place the chassis on a clean dry surface; see
Figure 8–17 Sensor Endcap and Chassis
Transponder Housing
Chassis
Sensor Endcap
Section 8 – Maintenance
49