STEP 10
OPERATING THE EQUIPMENT
10 In the HPR Support section, as soon as the
Enable HPR channel
is selected the
Permanently On
option will default to on.
11 Select the required
Pulse Position Mode
from the drop down menu.
OPERATING THE iWAND 6G CONFIGURATOR SOFTWARE
13 Clicking
Set Address
will open the address window.
14 Choose the new address according to the Wideband being used. Click
OK
.
The Pulse Position Mode options will only be available if the relevant
sensors are fitted to the instrument.
2
NOTE
12 If necessary it is possible to change the Address of the instrument by selecting the
Set Address
button at the bottom of the
Configuration
tab.
