EQUIPMENT SUPPLIED
STEP 2
This Quick Start Guide gives instructions on how to upgrade the HOST or DAS firmware
used in the Type 8300 Transponders using the Dual Test Cable.
The table below lists all transponders this Quick Start Guide is relevant to and their
identifying colour band.
To enable the firmware upgrade process, a Dual Test Cable is supplied with the
equipment.
If the correct test lead is not available, please contact Sonardyne for product support.
Refer to Step 1 for details.
Transponder Number
Transponder Type
Colour Band
8300
8301
8305
8307
8308
Compatt 6
DPT(i)6
AMT
Modem
SLT
Make sure all Warnings and Caution labels on the equipment are read and
understood. Refer to the equipment manual for further information and assistance.
