OM-7986
Page 12 of 23
Issue A - Rev 8
Remove the clip and pin holding the nut into the rope canister assembly, shown in picture
below. Load the nut as detailed in section 2.4, ensure the correct orientation of the nut.
Pass the rope through the centre of the assembly and attach onto the shackle as shown. Re-
attach the assembly onto the nut, replacing the pin and clip.
Fig.6 - LRT with the rope
canister attached.
Fig. 7 - Retaining pin connects nut to the canister
assembly. Rope is attached to the shackle
Fig.8 – LRT released, rope about to be deployed from canister