background image

2

Subwoofer Installation

70 volt audio systems allow for speakers to be daisy chained 
together. In a typical system with one zone of audio you simply run a 
stereo or 4 conductor wire from the amplifier to the closest speaker.   
Once you have designated your first speaker as either left or right, 
continue alternating the wires between the left and right channels 
creating a daisy chain of stereo satellites. The Subwoofer can be 
wired anywhere in the chain. See Figure 5 

1.   Find the best location to compliment your other speakers.

2.   Decide which channel the subwoofer will go on, calculate load. 

See wattage calculator.

3.   Connect  to  amplifier  wiring  using  the  supplied  wire  nuts,  see 

Figure 4

Twist

Wires

Together

Waterproof

Wire Nuts

From Speaker

To Amplifier

Positive

+

Negative

-

Figure 4

note: sonance strongly recommends the use of 14 gauge, or 

larger, direct burial grade wire.

caution: the amplifier should not be connected to ac power 

until all connections are completed. High power 70volt 

amplifiers present a serious shock hazard. Do not connect 

speaker wires to the amplifier until all other connections are 

completed.

 

4.   Dig a 4” – 5” deep trench to run the speaker wires in.

5.   Run the wire through the trench from your amplifier to the first 

speaker location. 

6.  Connect the direct burial wire to each speaker wire, connections 

should  be  made  with  either  silicone  filled  wire  connectors  or 
appropriate junction boxes. See Figure 4.  

IMPortant: Be sure not to let any stray ‘+’ and ‘–’ strands 

touch each other. touching strands can cause a short-circuit 

that could damage your amplifier.

note: confirm that you have connected speaker “+” to 

amplifier “+” and speaker “–” to amplifier “–”.

7.   After all the speakers connections are completed, connect the 

wires to your amplifier.  See Figure 5 for reference. 

8.  Turn  your  amplifier  on  and  test  the  system  with  your  favorite 

music.  If  the  speakers  are  operating  properly,  refill  the  wire 
trench and enjoy your new speakers.

SLS Wiring Diagram

Expandable

Crown CDi Series Amplifier

Figure 5

Note: The subwoofer can 

be connected at any point 

in the daisy chain.

Содержание HS10SUB

Страница 1: ...ows The SLS placed along the perimeter of the entertainment area Select a central location for the subwoofer if using only one subwoofer see figure 1 if using multiple subwoofers select locations that are the same distance from the main listening area Figure 1 Amplifier Power Planning The maximum number of satellites and subwoofers that can be used in a system will depend on the amplifier power av...

Страница 2: ... until all connections are completed High power 70volt amplifiers present a serious shock hazard Do not connect speaker wires to the amplifier until all other connections are completed 4 Dig a 4 5 deep trench to run the speaker wires in 5 Run the wire through the trench from your amplifier to the first speaker location 6 Connect the direct burial wire to each speaker wire connections should be mad...

Страница 3: ... 100Hz 3dB Power Required 100 watts Enclosure Material HDPVC High Density Polyvinyl Chloride Non corrosive sealed enclosure Crossover 100Hz Available Finishes Dark brown textured enclosure Dimensions Enclosure 13 5 wide 13 5 deep 14 high 34 29cm x 34 29cm x 35 56cm Shipping Weight 42 lbs 19 kg 14 13 5 13 5 ...

Страница 4: ... disclaimer of implied warranties the duration of such implied warranties is limited to period of Sonance s express warranty Your Product Model and Description SLS HS10SUB Warranty Period for this Product Five 5 years from the date on the original sales receipt or invoice or other satisfactory proof of purchase Additional Limitations and Exclusions from Warranty Coverage The warranty described abo...

Отзывы: