Sonab CLOUD 9 Скачать руководство пользователя страница 5

SONAB CLOUD 9 RANGE

cls, loudspeaker

the Cls is equipped with the  GloBal trac multi adapter Ga 69 which suits almost 
every 3-phase tracks on the market. the Cls is made for mounting direct into the 
tracks for optimum convenience. the Cls can receive it´s audio signal either wirelessly 
from the CtX transmitter, or wired from a CGV or another Cls or CsW speaker.

csW, subwoofer

the CsW should be mounted on the wall with the included wall bracket. if possible on 
the same height as the Cls speakers. the CsW have both wireless and wired capa-
bilities, so both installation options are available. For a convenient set up of the volume 
adjustment in wired mode there is an iR remote included with the subwoofer. 

ctX, Wireless transmitter

the CtX connects directly to the mac or pC through the usB interface. all audio avail-
able on the computer (also streaming services like spotify or Youtube) can be wireless 
transmitted. if there are no computer available as source the CtX has the option to also 
receive an analogue signal through the 3,5mm line input. the 3,5 mm line in can be 
connected to any analogue source. 

cvM Wireless volume control

the CVm must be used if the installation should be wireless or be a combination 
of wireless and wired. the CVm controls the master volume and the different zone 
volumes.

cvX, volume control extender

the CVX, wired volume extender is available to extend the master volume from the 
CVm or CGV to a more convenient placement. using the CVX also prevents unwanted 
tampering with the CVm or CGV, where also different zone volumes can be set (CVm), 
or switching of inputs (CGV).

cEX, Wireless range extender

the CEX wireless extender is used to extend the wireless network, or to go around 
difficult wifi conditions.

cgv, Wired volume control

the sonab CGV should be used if a 

wired only

 installation is intended. the CGV has 

inputs for 2 different analogue sources. the CGV unit contains the master volume for 
the complete system.

cls optional wallbracket

optional wall bracket/table stand for Cls loudspeaker. use if location don´t have 
tracks for power. Comes with power cord to connect to aC outlet.

this is an overall general description of the sonab Cloud 9 music system. For product 
specifications of the sonab products please see the specific user manual that comes with 
each of the products. Following products are available in the sonab Cloud 9 series:

Содержание CLOUD 9









Отзывы: