Ignore encoded broadcasts:
1. Use the navigation buttons and select the Channel Filter menu, than press the
„OK” button.
2. By selecting the „FTA Only” menu, it only tunes the encoded, open-access channels
3. By selecting „All Channels” menu, you tune both coded and open-access channels
Selecting region:
Select the „Country” menu to set the region for your location.
Logical channel number:
When the LCN option is switched on, the device will sort the channels according to
the channel assignment defined by the service provider. If the LCN (Logical channel
number) option is active, the channel number cannot be changed.
Antenna power supply:
In „Active Antenna” menu you can select, whether the device is providing power to the
antenna through the antenna connection point. (5 V DC)
USE
Changing channel
There are several ways to select the channel you want to display, by scrolling the
channels up or down, using the number buttons, or from the the on-screen channel list.
1. Scroll channels up and down
Use the „UP” and „DOWN” buttons on the remote control to scroll through the
channels on after the other.
2. By channel number:
Use the number buttons on the remote control to enter the channel number you
want to watch.
3. On-screen channel list:
The channel you want to watch can be selected directly from the on-screen channel
list. Press the „OK” button while watching TV to display the list.
4. On-screen favorite channel list:
It displays the channel list as described in the previous point, then press the „RIGHT”
or „LEFT” buttons on the remote control to scroll through the set favorite lists.
Setting volume
Use the remote control’s VOL+ and VOL- buttons to set the appropriate volume on
the unit. Too high volume set on the DV-T2 may cause distortion in the TV quality.
Electronic program guide (EPG)
Using the EPG:
1. Press the EPG button to display the „EPG”.
2. Use the remote control’s directional buttons on the remote control to choose
channels and programs. Use the „RIGHT” / „LEFT” buttons to switch between the
TV channel list column and the program list column.
3. Press the „Green” button on the remote control to set a reminder or recording time
for the selected event.
4. Press the „Red” button on the remote control to display the time zone for easier time
selection, toggle between half-day, full-day or weekly view.
Attention!
The information contained in the electronic program guide is the
responsibility of the broadcaster.
CHANNEL EDIT
Channel edit menu
After displaying the main menu, press „RIGHT” / „LEFT” buttons to select „Channel”
menu in the bottom menu.
Customizing the list of the TV/Radio channels:
1. Press the „UP” or „DOWN” buttons and step on „Channel Manager” menu, hold
pressed the „OK” button to enter the menu.
2. The „Channel Manager” menu includes the following options, which you can
activate with the color/other buttons on the remote control:
red: „Lock”, green: „Del”, yellow: „Skip”, blue: „Rename” OK: „Renumber”
To activate the lock function, the device asks for a PIN, the default PIN is 0000
3. By pressing the TV/Radio button, you can change between the list of the TV and
the Radio channels
4. Press the „EXIT” button to exit.
List of favorites:
1. Press the „UP” or „DOWN” button and scroll to the „Favorite list” menu, press the
„OK” button to enter the menu.
2. Use the colorful buttons on the remote control to select the favorite group of
channels.
3. Press the „EXIT” button to exit editing and save the settings
4. Favorite channel list displayed on screen: Press „OK” button to activate channel list,
then press „RIGHT” or „LEFT” buttons on the remote control to scroll through the
complete list and set favorite list.
SYSTEM SETTING
Default setting
This menu allows you to set the default settings for your device (menu language,
screen display format, etc.)
1. Use the „RIGHT” / „LEFT” buttons to select „Preference” option from the pictograms
in the bottom row.
2. Use the „UP”/ „DOWN” buttons to select the desired item you want, then press
the „OK” button
3. Press the „EXIT” button to exit.
Display language
1. Press the „UP” or „DOWN” buttons and step on the „OSD Language” menu, press
the „OK” button to enter to the menu.
2. Use the „EP” / „DOWN” buttons to scroll through the languages. Press the „OK”
button to activate the selected language
Screen display timing
1. Press the „UP” or „DOWN” button and step on the „OSD Timeout” menu, press the
„OK” button to enter the menu.
2. With „UP” / „DOWN” buttons you can scroll between display periods. Press the „OK”
button to activate the selected time.
Transparency of screen display
1. Press the „UP” or „DOWN” buttons and step on „OSD Transparency” menu, press
the „OK” button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll between the measures of transparency.
(0%-60%) Press the „OK” button to activate the selected value
Selecting subtitle language
1. Press the „UP” or „DOWN” button and scroll „1. Preferred Subtitle”
or 2. Preferred Subtitle” menu, press the „OK” button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll through the available languages. Press the
„OK” button to activate the selected languages.
Hearing loss function:
If provided by the broadcaster, switch off / on subtitles for
the selected channel.
Selecting audio language
1. Press the „UP” or „DOWN” button and scroll on „1. Preferred Audio” or „2. Preferred
Audio” menu, press the „OK” button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll between the selectable languages. Press
the „OK” button to activate the selected languages.
System setting
This menu item allows you to set the default setting for your device (menu language,
screen display format, etc.).
1. Use the „RIGHT” / „LEFT” buttons to select the „Setting” option
2. Use the „UP”/ „DOWN” buttons to select the desired element, then press the „OK”
button
3. Press the „EXIT” button to exit.
Timing of recordings, reminders
1. Press the „UP” or „DOWN” button and scroll the „Timers” menu, press the „OK”
button to enter the menu.
2. Use the „UP” / „DOWN” buttons to scroll through the timer programs (01-27). Press
the „OK” button to activate the selected timer.
- Setting the Date: activate with the „RIGHT” arrow, use the navigation buttons to
change the date. DD/MM/YYYY (allow characters only that exist in the calendar
to be displayed. e.g.: if you want to set 2 and 31 for the second character, you
must first set the second character to 1, so that the device will offer 3 as the first
character.) Press the „OK” button to activate the set date.
- Setting the Program Name: use the „RIGHT” arrow to activate it. Press the „UP” /
„DOWN” button to select the desired channel and press the „OK” button to confirm
the desired channel.
- Setting End Time : HH/MM handling similarly, as setting the Date
- End Time: HH/MM display only, not adjustable
- Setting Duration: HH/MM handling similarly, as setting the Date. 23:59 is the
maximum time period which can be set.
- Setting Mode: Once, Weekly, Monthly, Yearly, WeekDay
- Setting the Type: On, Record, Channel: switches to the set channel or turns on
the device at the set time, Standby: Switches the device on or off at the set time.
When you have set all the timer information, you can accept the settings by pressing
the „OK” button, activating the timer this way.
The green LED lights up in the display when the timer is off.
Warning!
In timer recording mode, the remote control functions will not be locked. In case of a
channel change, the unit pauses recording from the set channel, if you reset the unit
with the remote control to the originally set channel during the preset timing, the unit
will continue recording according to the preset program. The interrupted recording is
recorded in separate files.
When the timer recording starts, the receiver will also activate the TV if it was
previously in standby mode.
Parental guide
From the „Setting” menu, select the „Child lock” option, then press the „OK” button.
Enter the security code (the default code is „0000”). After entering the correct
password, the parental control menu will appear.
1. System Lock: The device does not allow broadcasts with age values specified in the
Parental Rating menu. You can turn the lock on/off with this option.
2. Parental Rating: you can choose between the selection of 0 and 4-18 years age
3. Changing PIN: After entering the old code, enter the new code and enter the new
password again in line Confirm Password. This activates the new security code.
7
