32
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
HYBRID HEATER
FEATURES
hybrid heater for heating indoor air ● the unit combines the comfortable and economical operation of infrared panels with the feeling of warmth provided
by conventional heating methods ● remote control option ● 450 W output ● electronic thermostat in the remote controller ● weekly program ● wall or
ceiling mounted design ● automatic shut-off in case of overheating
OPERATION
Switch on the appliance using the main switch at the bottom (1). The device beeps briefly, the red LED on the power supply lights up and the device is
ready to connect to the remote control.
Connect the remote control to the unit as follows:
1. Insert a 2x1.5V AAA battery into the remote control, be mindful of the correct polarities
2. Press and hold the - and + buttons (2) on the remote control until CONNECT flashes on the display.
3. If the connection is successful, the flashing CONNECT will turn continous and the green LED on the unit’s power supply will turn on.
You can control the device with the remote control.
Date and time setting
1. Press and hold the program selector button (3) on the unit until the text “24h” appears flashing on the remote controller display.
2. You can then use the + and – thermostat setting buttons to toggle between 24h and 12h time display, then press the on/off button (4) on the remote
controller.a
3. Use the + and – thermostat setting buttons to set the day, then press button (4).
SUN
MON
TUE
WED
THU
FRI
SAT
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
4. Use the + and – thermostat setting buttons to set the hour, then press button (4).
5. Use the + and – thermostat setting buttons to set the minute, then press button (4).
6. Use the + and - thermostat setting buttons to turn the daylight saving time program (DST) ON or OFF, then press button (4).
7. Use the + and – thermostat setting buttons to select between °C and °F, then press button (4). Now you have successfully set the current time on
your device.
Operating the device
You can switch the appliance on or off at any time using the on/off button (4) on the remote controller. In OFF position, pressing the on/off button (4) on
the remote controller will first display the text “TARGET” with the set temperature value. You can then use the + and – thermostat setting buttons to set the
desired room temperature between 0 and 70°C, and then switch on the unit by pressing the on/off button (4) on the remote controller again. If the ambient
temperature drops 3 °C below the set value, the device switches ON. If the ambient temperature exceeds the set value by 1°C, the device switches off.
Caution! If the temperature detected by the thermostat falls below 0°C, the measured temperature (CURRENT) will trigger the error message LL, while
if it goes above 70°C, it will trigger the error message HH on the thermostat.
Weekly program setting
1. Press the program selector button (3) of the device.
2. Use button (3) to navigate to the desired day.
3. Use the + and – thermostat setting buttons to set the switch-on time (hours) (S.T), then press OK
4. Use the + and – thermostat setting buttons to set the switch-off time (hours) (E.T), then press OK
5. Use the + and – thermostat setting buttons to set the desired temperature (TARGET), then press OK
6. If the setting is successful, the text “MODE” will start flashing on the remote controller display above the current time.
Window opening sensor
The window opening sensor function is active when the remote controller display shows its indicator (OPEN). When the device detects a sudden
decrease of the ambient temperature, the function is activated and the indicator starts to flash. The device switches off automatically. Press any button
on the remote controller to restart the device. Then, the device switches back to the last set temperature.
Overheating protection
serves to switch off the device in the event of overheating. Disconnect the device by pulling out the mains plug. Let the device
cool down (min. 30 minutes). Check there is anything preventing the free flow of air. Turn on the device again. If the overheat protection keeps activating,
disconnect the device by pulling out the mains plug and contact an authorised service shop.
TECHNICAL SPECIFICATIONS
power supply: .....................................................230 V~ / 50 Hz
output..................................................................
450 W
heater dimensions: .............................................90,5 x 50,5 x 4 cm
IP protection: ......................................................IP20: The device is not protected against ingress of water.
Transmission frequency/power ...........................2,4 GHz / <1mW
weight: ................................................................3,45 kg
Содержание home FKIR 452
Страница 39: ......